Balustrade and Railing Height Regulations

Hand Railing

One of the most common searches on this site is in regards to the legal heights of balcony railings and balustrades. The main query we receive is whether existing railing needs to be modified to meet the current building code if it was built prior to the current code and met relevant requirements in place at the time of construction.

That is both a simple and difficult question to answer. The simple answer is NO, as there is currently no retrospective requirement unless significant modifications are made. Many Insurance Companies, Councils and other Authorities will confirm this. Many Lawyers will agree and there does not appear to have been any successful court cases to suggest this isn’t so.

BUT we believe that the day will come when there is a successful claim made against the owner of an historically compliant balustrade, and to be a real fun policeman, even against the owner of a currently compliant balustrade . The difficult answer is therefore “MAYBE”. Our opinion is that Building Codes and Standards are a MINIMUM requirement and there is an overriding legal obligation to to fully assess the risk and go above and beyond minimum standards if required. For example, if furniture and other items are situated near the railing and children frequent the area then a 1m high balustrade is not adequate. Have a look at the balustrade near shopping centre foodcourts that overlook an atrium. These were raised some years ago after children fell by climbing on chairs and tables.  An older height balustrade near an area where large crowds congregate (and/or drink alcohol) should be subject to some serious risk assessment. See our information sheet from our Public Liability Website

The main point is to: PROPERLY ASSESS THE RISK AND IMPLEMENT APPROPRIATE CONTROLS. Replacing or modifying older balustrades may not be immediately possible or financially viable so alternative or interim controls may be better than nothing ie move items or high risk activities away from the balustrade or put warning signs on access doors to hotel balconies etc.

What are the current BCA  requirements for balustrades?

The current BCA requirements are that a balcony balustrade have the following attributes: –

• The top of the railing must be least 1 metre (1000mm) from the ground.
• Any opening must not allow a 125mm sphere (ie childs head) to pass through. So the vertical components must not be more than 125mm apart.
• The gap between the balcony surface to the bottom rail must be no more than 100mm.
• For balconies with a fall height of more than 4m there must not be any horizontal or near horizontal elements between 150mm and 760mm above the floor that facilitate climbing.

We found an article by Solutionsie in their Body Corporate Managers Newsletter which provides more information on this subject including some recent incidents and court cases. See the full article Balustrade Height (2574)

Solutionsie even offer a balustrade testing service.

Tagged as: 1m, Balconies, balcony railings, balustrade, court cases, drink alcohol, high risk, information sheet, insurance companies, interim controls, large crowds, legal obligation, policeman, Public Liability, railing, real fun, relevant requirements, risk activities, risk assessment, simple answer